Type: Sail
Year: 1987
Length: 37'
Price: $44,900
State: New York
Engine: Yanmar
Engine Count: 1
Drive: Inboard
Horsepower: 44
Fuel: Diesel
Hull Material: Fiberglass
Beam: 11' 6"
Draft: 5' 8"
Condition: Very good
CLOSE
Type: Sail
Year: 1987
Length: 37'
Price: $44,900
City: Plattsburg
State: New York
Engine: Yanmar
Engine Count: 1
Drive: Inboard
Horsepower: 44
Fuel: Diesel
Hull Material: Fiberglass
Beam: 11' 6"
Draft: 5' 8"
Condition: Very good
e-Mail Seller
Boat is located in: Plattsburg, New York
A beautiful example of a Tayana 37.
Since July 2020 all sea cocks have been replaced with Groco Bronze seacocks.
Most intake and discharge hoses have been replaced.
A new water heater has been installed as has a new 3-bank Guest battery charger.
A new Simrad NSS12 EVO3 chart plotterradar is on-board.
The head is new, new fenders, new dock lines, new Lowrance Link-8 VHF marine radio.
Wind vane steering and wind generator.
I purchased the boat in June of 2020 with great expectations but physical/medical problems have arisen which preclude using it as hoped.
All running rigging should be replaced, standing rigging is good.
A new main sail was just hanked on in June 2021.
It comes with suitable jib and staysail.
The extrusion on the roller furling has a slight kink in it which needs to be straightened.
The teak cockpit seat covers were replaced with plywood covers.
That was Ok for us with cockpit seat covers.
You may want to have teak covers made.
A beautiful example of a Tayana 37.
Since July 2020 all sea cocks have been replaced with Groco Bronze seacocks.
Most intake and discharge hoses have been replaced.
A new water heater has been installed as has a new 3-bank Guest battery charger.
A new Simrad NSS12 EVO3 chart plotterradar is on-board.
The head is new, new fenders, new dock lines, new Lowrance Link-8 VHF marine radio.
Wind vane steering and wind generator.
I purchased the boat in June of 2020 with great expectations but physical/medical problems have arisen which preclude using it as hoped.
All running rigging should be replaced, standing rigging is good.
A new main sail was just hanked on in June 2021.
It comes with suitable jib and staysail.
The extrusion on the roller furling has a slight kink in it which needs to be straightened.
The teak cockpit seat covers were replaced with plywood covers.
That was Ok for us with cockpit seat covers.
You may want to have teak covers made.